manualshive.com logo in svg

Canon imageprograf iPF685, User Manual

The Canon imagePROGRAF iPF685 is a top-of-the-line large format printer that delivers exceptional quality prints. Ensure a seamless user experience with our comprehensive User Manual. Download the manual for free from our website, and unlock the full potential of your iPF685 printer. {Website} is your go-to destination for hassle-free downloads.

Share
Download
background image

Cannot print over a network

Cannot print over a network

Cannot connect the printer to the network .....................................................................................................

590

Cannot print over a TCP/IP network ...............................................................................................................

590

Cannot print over a Bonjour network ..............................................................................................................

590

Cannot connect the printer to the network

Cannot connect the printer to the network

Cause

Corrective Action

The Ethernet cable
is not connected
correctly to the
printer's Ethernet
port.

1.

Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer
on. For instructions on connecting the cable, refer to the Setup Guide.

2.

Make sure the Link indicator is lit.
The bottom indicator is green if the printer is connected via 1000Base-T, while the top indicator is orange
if connected via 100Base-TX and the top indicator is green if connected via 10Base-T.
If the Link indicator is not lit, check the following points.

•

Make sure the connection point is on.

•

Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.

•

Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.

•

Check the communication mode with the connection point.
Although the printer normally detects the communication mode and transmission rate of the communi-
cation point automatically (in auto negotiation mode), sometimes the communication point settings
cannot be detected. In this case, configure the connection method manually, specifying the communi-
cation mode in use.

 (See "

Configuring the Communication Mode Manually

.")

➔

P.461

Cannot print over a TCP/IP network

Cannot print over a TCP/IP network

Cause

Corrective Action

The printer's IP address is not config-
ured correctly.

Make sure the printer's IP address is configured correctly.

 (See "

Configuring the IP Address Using imagePROGRAF Device Setup Utility

.")

➔

P.463

 (See "

Configuring the IP Address Using the Printer Control Panel

.")

➔

P.452

The printer's TCP/IP network settings
are not configured correctly.

Make sure the printer's TCP/IP network settings are configured correctly.

 (See "

Configuring the Printer's TCP/IP Network Settings With RemoteUI

.")

➔

P.456

The computer you are trying to print
from is not configured correctly.

Make sure the computer's TCP/IP network settings are configured correctly.

 (See "

Configuring the Printer Driver Destination (Windows)

.")

➔

P.455

 (See "

Configuring the Destination in TCP/IP Networks (Mac OS)

.")

➔

P.459

Cannot print over a Bonjour network

Cannot print over a Bonjour network

Cause

Corrective Action

The computer you are trying to
print from is not configured cor-
rectly.

Make sure the computer is configured correctly.

 (See "

Configuring the Destination for Bonjour Network (Mac OS)

.")

➔

P.459

The computer and printer are not
on the same network.

Due to the nature of Bonjour, you cannot print if the printer is on another network behind a rout-
er. Make sure the computer and printer are on the same network. For information about net-
work settings, ask your network administrator.

Cannot connect the printer to the network

                                                                                                                                                               

iPF685

                                                                                                                                                                                                                     

User's Guide

 

 

Troubleshooting

Cannot print over a network

 

590

Summary of Contents for imageprograf iPF685



































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imageprograf iPF685

Canon IMAGEPRESS C7010VPS Brochure & Specs preview
IMAGEPRESS C7010VPS
Brand: Canon Pages: 4
Canon iP2600 - PIXMA Color Inkjet Printer Setup Instructions preview
iP2600 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon FAXPHONE L80 Setup Instructions preview
FAXPHONE L80
Brand: Canon Pages: 8
Canon ImageCLASS 2300 Network Manual preview
ImageCLASS 2300
Brand: Canon Pages: 102
Canon PIXMA MX882 Series Network Setup Manual preview
PIXMA MX882 Series
Brand: Canon Pages: 34
Canon MX470 Getting Started preview
MX470
Brand: Canon Pages: 4
Canon MX470 User Manual preview
MX470
Brand: Canon Pages: 913
Canon Laser Class 700 Series Setup Manual preview
Laser Class 700 Series
Brand: Canon Pages: 30
Canon Laser Class 700 Series Datasheet preview
Laser Class 700 Series
Brand: Canon Pages: 6
Canon Laser Class 700 Series Specification preview
Laser Class 700 Series
Brand: Canon Pages: 6
Canon Laser Class 700 Series Network Manual preview
Laser Class 700 Series
Brand: Canon Pages: 108
Canon PIXMA MX860 series Network Manual preview
PIXMA MX860 series
Brand: Canon Pages: 9
Canon imagePROGRAF iPF9400 Brochure & Specs preview
imagePROGRAF iPF9400
Brand: Canon Pages: 8
Canon PIXMA MX860 series Getting Started Manual preview
PIXMA MX860 series
Brand: Canon Pages: 93
Canon MP980 series Manual preview
MP980 series
Brand: Canon Pages: 20
Canon PIXMA MX922 Setup Manual preview
PIXMA MX922
Brand: Canon Pages: 30
Canon PIXMA MX922 Easy Setup preview
PIXMA MX922
Brand: Canon Pages: 2
Saxxot CRU-158 Operation Manual preview
CRU-158
Brand: Saxxot Pages: 13

Brands by name

Popular brands

Load more brands