manualshive.com logo in svg

Canon imagePROGRAF iPF680, User Manual, Page: 621 / 650

Share
Download
Canon imagePROGRAF iPF680 User Manual Download Page 621

Messages regarding printing or adjustment

Messages regarding printing or adjustment

Cannot adjust printhead. .....................................................................................................................................................

622

Borderless printng not possible. ......................................................................................................................................

617

Cannot adjust paper feed. ..................................................................................................................................................

621

Check printed document. ...................................................................................................................................................

621

Cannot adjust paper feed.

Cannot adjust paper feed.

Cause

Corrective Action

The Printhead nozzles are clogged.

Execute 

Adj. Quality

 again, as follows.

1.

Press the 

OK

 button to clear the error.

2.

Print a test pattern to check the nozzles.

 (See "Checking for Nozzle Clogging.")

➔

P.549

3.

Clean the Printhead if the nozzles are clogged.

 (See "Cleaning the Printhead.")

➔

P.550

4.

Execute 

Adj. Quality

 again.

 (See "Automatic Banding Adjustment.")

➔

P.532

Highly transparent film is loaded that cannot be used
for automatic feed amount adjustment.

Press the 

OK

 button to clear the error, and then adjust the feed amount manually.

 (See "Manual Banding Adjustment.")

➔

P.534

Check printed document.

Check printed document.

Cause

Corrective Action

The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.

 (See "Cleaning the Printhead.")

➔

P.550

iPF680

                                                                                                                                                                                         

Cannot adjust paper feed.

User's Guide

                                                                                                                                                                                                                             

 

 

Error Message

Messages regarding printing or adjustment

621

 

Summary of Contents for imagePROGRAF iPF680











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments