manualshive.com logo in svg

Canon imagePROGRAF iPF680, User Manual, Page: 590 / 650

Share
Download
Canon imagePROGRAF iPF680 User Manual Download Page 590

The printer stops during a print job

The printer stops during a print job

An error message is shown on the Display Screen .................................................................................................

590

The printer ejects blank, unprinted paper ...................................................................................................................

590

The printer stops when printing a HP-GL/2 job (the carriage stops moving) .............................................

602

An error message is shown on the Display Screen

An error message is shown on the Display Screen

Cause

Corrective Action

The last portion of roll paper was used during a print job, and paper could not be
advanced because the trailing edge is taped to the roll.

Remove the used roll and insert a new roll.

 (See "Removing the Roll from the Printer.")

➔

P.378

 (See "Removing the Roll Holder from Rolls.")

➔

P.381

 (See "Loading and Printing on Rolls.")

➔

P.19

The printer ejects blank, unprinted paper

The printer ejects blank, unprinted paper

Cause

Corrective Action

The leading edge of the roll paper was cut to
straighten it.

The leading edge of rolls may be cut to straighten it if 

Trim Edge First

 is set to a value

other than 

Off

 in the Control Panel menu.

 (See "Cutting the Leading Edge of Roll Paper Automatically.")

➔

P.389

The Printhead nozzles are clogged.

Print a test pattern to check the nozzles and make sure the Printhead is in good condi-
tion for printing.

 (See "Checking for Nozzle Clogging.")

➔

P.549

A print job was received from an incompatible
printer driver.

Use the correct imagePROGRAF printer driver for the printer and try printing again.

The printer has received print data that in-
cludes HP RTL commands when 

Auto Rotate

is 

On

 in the Control Panel menu.

In the Control Panel, set 

Auto Rotate

 to 

Off

 and print again.

 (See "Menu Settings.")

➔

P.456

The printer is damaged.

Contact your Canon dealer for assistance.

An error message is shown on the Display Screen

                                                                                                                                                    

iPF680

                                                                                                                                                                                                                             

User's Guide

 

 

Troubleshooting

The printer stops during a print job

 

590

Summary of Contents for imagePROGRAF iPF680











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments