Detecting Roll Paper was Replaced While the Power was Off
When you turn the printer on, it can confirm whether the roll paper was replaced while the power was off.
From
Printer settings
on the Home screen, set
Auto feed at power on
to
Enable
to detect the position
of the roll paper's leading edge when the power is turned on. If the position of the roll paper's leading edge
is over 1 mm since the last time the power was turned off, the printer determines that the roll paper has
been replaced, and then starts feeding paper automatically to detect the paper width and the barcode for the
management of unused roll paper.
Note
• Setting
Auto feed at power on
to
Enable
causes the operations that can be done after turning on the
•
power to take longer since the printer must detect the leading edge of the roll paper.
•
Auto feed at power on
is set to
Disable
when you buy the printer.
•
Follow these steps to set
Auto feed at power on
to
Enable
as follows.
1.
Tap
(
Setup
) on Home screen of operation panel.
1.
Note
• If the Home screen does not appear, press the
HOME
button.
•
2.
Tap
Printer settings
.
2.
3.
Tap
Paper-related settings
.
3.
4.
Tap
Auto feed at power on
.
4.
5.
Tap
Enable
.
5.
118
Summary of Contents for imagePROGRAF GP-300
