7
7
Installation Procedure > Installing the Open I/F PCB
Installation Procedure > Installing the Open I/F PCB
8) Install the Open I/F PCB.
• 1 Connector
• 5 Screws (Use the screws removed in steps 4, 5, and 6.)
• 3 Screws (TP; M3 x 6)
TP
M3x6
2x
6x
1x
9) Release the 2 Lock Levers in the direction of the arrows, and uniformly push in the Main
Controller PCB 2 with both hands until it stops.
CAUTION:
Install the Main Controller PCB 2 while paying attention not to trap cables.
Lock
Lever
F-1-13
F-1-14
10)
Turn over the 2 Lock Levers, and push in and secure the Main Controller PCB 2.
• 2 Screws (Install in order of bottom and top.)
CAUTION:
Be sure to perform the work in the order from 1 to 5 in the figure because the connector
of the Main Controller PCB 2 may not be connected.
2x
11)
Connect the Reader Communication Cable.
12)
Connect the Interface Cable to the Open I/F PCB.
1x
F-1-15
F-1-16
Summary of Contents for imagePRESS Server G100
Page 32: ......
