Addition of New Features to the Visual Message
Function
98AE-005
The following features have been added to the Visual Message function.
Hiding Error Message Screens(P. 14)
Setting Exception Addresses Where a Proxy Server Is Not Used(P. 14)
Using the Visual Message Function for Greater Convenience(P. 15)
(Ver. 3.11-)
Hiding Error Message Screens
Up until now, error message screens appeared if content was not displayed for some reason. However, you can specify
that error message screens not appear.
1
Start the Remote UI.
2
Click [Settings/Registration] on the portal page.
3
Click [License/Other] [Visual Message Settings] [Display Settings].
4
In [Content to Display When an Error Occurs], select [Do not display an error message
or Visual Message content].
5
Click [OK].
Setting Exception Addresses Where a Proxy Server Is Not Used
Specify the proxy settings in the Visual Message function to match the settings in <Proxy Settings>. If a proxy is set,
the specified content may not appear. In this case, you can set an exception address so that the proxy server is not
used.
1
Start the Remote UI.
Changes to Functions
14