Canon imagePress C910 Customer Expectation Document Download | Manualshive

Page: 105 / 129

background image

imagePRESS C910/C810/C710 Customer Expectations Document

Version 5

imagePRESS C910/C810/C710 Customer Expectations Document

Page 105

10. Consumables

Consumables are all products and materials that are consumed with regular use
and cannot be reused. Such consumables include, but are not limited to, paper,
chemicals, and toner. A number of factors go into the approximate life expectancy
of a consumable item, including paper size and the amount of coverage per page.

Operate the machine within the following usage conditions to achieve optimal
machine performance.

Item

Condition

Operating Temperature

68°F to 80.6°F (20°C to 27°C)

Operating Humidity

15% to 60%

Optimal
Performance
Range

imagePRESS
C910

40,000 to 167,000

imagePRESS
C810

30,000 to 147,000

imagePRESS
C710

5,000 to 125,000

Image Ratio

imagePRESS
C910

8.5%

imagePRESS
C810

imagePRESS
C710

10.1 Consumable Parts

Consumable parts are defined as those parts having a limited life that will be
reached during a customer’s specific machine operation, and then should be
replaced as needed. Examples of consumable parts include, but are not limited to,
feed rollers, cleaning blades, and fixing assembly components.

An estimated consumable parts life can be provided by a service technician to
assist in the initial parts/supplies planning. A consumable part’s life expectancy is
directly related to usage factors, such as paper size, paper quality, environment,
usage application, and machine maintenance. Therefore, consumable parts do not
have a warranty, and Canon U.S.A., Inc. cannot guarantee a minimum life.

103 Based on 20 lb, LTR size paper, and under the above optimal environmental conditions.

«
...
103
104
105
106
107
...
»

Summary of Contents for imagePress C910


































































































































Reviews:

No comments

Related manuals for imagePress C910

Brand: 3DMakerWorld Pages: 85

Brand: B3 innovations Pages: 12

Brand: Nantian Electronics Pages: 4

AdvancedPunch Pro

Brand: GBC Pages: 92

WorkCentre 7232

Brand: Xerox Pages: 13

CX PRINT SERVER 550

Brand: Xerox Pages: 166

Brand: Xerox Pages: 4

Brand: KIP Pages: 103

Brand: TierTime Pages: 28

Liquid Crystal Opus

Brand: PhotoCentric Pages: 12

Brand: TRAK Pages: 98

Brand: Creality Pages: 24

Brand: Ricoh Pages: 2

Brand: Printronix Pages: 206

3600B - Phaser B/W Laser Printer

Brand: Xerox Pages: 2

Brand: Tektronix Pages: 178

Brand: VASTEX Pages: 8

Brand: Brady Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands