6) Remove the separation plate [1] while lifting the rear side.
7) Put the mounting hole [1] on the front side of the new separation plate prepared in the positioning pin [A] and fit the screw [2]
on the rear side of the separation plate in the cut out [B].
8) Put the straight end [1] of the torsion spring in the notch [A] on the separation plate and mount the spring [2] on the positioning
pin [B].
[Reference] The torsion springs for the front side [A] and rear side[B] have different shapes.
9) Put the bent end [1] of the torsion spring in the boss [A] on the metal plate.
7
