Canon imagePRESS C8000VP Quick Manual Download Page 9

Page: 9 / 68

Important Safety Instructions

IMPORTANT

Power supply connection

• Do not connect the power cord to an uninterruptible

power source.

• If the machine is connected to the power outlet with

multiple sockets, do not use the remaining sockets
to connect other devices.

• It is recommended that the power outlet wired to an

indoor circuit breaker is used.

• When disconnecting the power cord, wait at least 5

seconds before connecting the power cord again.

Other Precautions

Electrical noise and excessive voltage drop may cause
a malfunction or loss of data in the machine and
computers.

WARNING

• Do not use power supplies with voltages other than

those specified herein, as this may result in a fire or
electrical shock.

• Do not use power cords other than the provided

power cord, as this may result in a fire or electrical
shock.

• The provided power cord is intended for use with

this machine. Do not connect the power cord to
other devices.

• Do not damage, modify, pull on, or excessively bend

the power cord. Also do not place heavy objects
on the power cord, as this could cause electrical
damage and result in a fire or electrical shock.

• Do not connect or disconnect the power plug with

wet hands, as this may result in electrical shock.

• Do not connect the power cord to a multiplug

power strip, or do not use extension cords, as this
may cause a fire or electrical shock.

• Do not bundle up or tie the power cord in a knot, as

this may result in a fire or electrical shock.

• Insert the power plug completely into the power

outlet, as failure to do so may result in a fire or
electrical shock.

• When there is thunder and lightning, disconnect the

power plug from the power outlet, as failure to do so
may result in a fire, malfunction, or electrical shock.

CAUTION

• Do not connect any unauthorized optional products

to the outlet for connecting optional products, as
this could result in a fire or smoke.

• Install this machine near the power outlet and leave

sufficient space around the power plug so that it can
be unplugged easily in an emergency.

▀

Power Supply

This machine has two power cords. Plug the machine into the following outlets.

• 208 V AC 16 A or greater (1-phase 3-wire)

• 208 V AC 24 A or greater (3-phrase 5-wire)

Summary of Contents for imagePRESS C8000VP





































































Search results

Summary of Contents for imagePRESS C8000VP

Reviews:

Brands by name

Popular brands

Canon imagePRESS C8000VP, Quick Manual

Search results

Summary of Contents for imagePRESS C8000VP

Reviews:

Brands by name

Popular brands