imagePRESS C910/C810/C710 Customer Expectations Document
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
Page 84
6.32 SDD Square Fold Booklet-Maker with Two-Knife Trimmer
Item
Specifications
Required Equipment
Booklet Trimmer-F1
Pass Through Width
(No Trimming) (z)
Approximately 5 7/8” (150 mm) to 12 5/8” (320 mm)
Booklet Trimming
Input W idth
:
Approximately 8.27” (210 mm) to 12.60” (320 mm)
Output Width:
Approximately 7.87” (200 mm) to 12.60” (320 mm)
Input/Output Length:
Approximately 4.71” (120 mm) to 9.60” (244 mm)
Acceptable Paper
Weights
16 lb bond to 110 lb cover (60 to 300 g/m
2
)
Trimming Width
Each Side: 0.08” to 1.38” (2 mm to 35 mm)
Together: 0.16” to 2.76” (4 mm to 70 mm)
Asymmetrical Trim
(Offset Capability)
Approximately ±0.59” (15 mm)
Minimal Booklet Staple
Clearance (from Top to
Bottom)
Approximately 1.57” (40 mm)
Booklet Sheet Capacity
Up to 25 sheets (100 pages per booklet or 5 mm in height, whichever is less)
(20 lb bond (80 g/m
2
))
Maximum Productivity
Up to 1,800 booklets/hour (each booklet up to 100 pages)
(20 lb bond (80 g/m
2
))
Maximum Noise Level
Approximately 70 dB
Power Source
120 V AC, 60 Hz, 15 A
Maximum Power
Consumption
Approximately 740 W
Dimensions (H x W x D)
Approximately 51.2” x 62.7” x 27.6” (1,300 mm x 1,592 mm x 700 mm)
(with the conveyor tray fully extended)
Weight
Approximately 573 lb (260 kg)
83 If a booklet’s input height is greater than 12.60” (320 mm), it must be trimmed to 12.60” (320 mm) or fewer
inches (millimeters).
