Canon imagePRESS C7011VPS series, Operation Manual

Page: 33 / 391

The stacker/stapler, optional inserter and optional
integrated punch unit
Introduction
With the Finisher-AJ1 and Saddle Finisher-AJ2 you can stack and staple prints. With the Saddle
Finisher-AJ2 you can also saddle stitch booklets. With the optional Puncher Unit-BB1 you can
punch holes in your prints.
IMPORTANT
You cannot attach the optional Finisher-AJ1 and Saddle Finisher-AJ2 to the machine at the same
time.
External view
(I side)
( side)
1
2
3
2
3
4
5
6 6
7
7
8
[8] The Saddle Finisher-AJ2 with inserter (left-hand side) and Finisher-AJ1 (right-hand side)
Main parts
Component Function
1 Main power switch Press to the "I" side to turn on the stacker/
stapler.
2 Top cover Open the top cover to clear a paper jam
inside the unit.
3 Front cover Open the front cover to replace the staple
cartridge, remove jammed paper, or clear
a staple jam in the stapler unit and saddle
stitcher unit.
4 Booklet tray
Saddle Finisher-AJ2 only Receives saddle stitched booklets.
5 Auxiliary booklet tray
Saddle Finisher-AJ2 only Pull out the auxiliary booklet tray to re-
ceive large size booklets.
6 Lower tray Receives finished documents.
4
The stacker/stapler, optional inserter and optional integrated punch unit
Chapter 2 - Main parts 33