Canon ImagePress C700, Technical Workbook

Page: 13 / 93

T E C H N I C A L W O R K B O O K
7
Use Care Mounting the Pressure Belt Displacement Control Motor Unit
If the Pressure Belt Displacement Control Motor Unit [A] is not mounted properly, some prospective issues
that could develop are E007-0012, 0022, and 0102.
1) Mount the Pressure Belt Displacement Control Motor Unit by fitting the Posts [1], [2] and the
Positioning Boss [3] on the Pressure Belt Unit to the Hook [4], the Hole [5], and the Positioning
Cutout [6] on the Pressure Belt Displacement Control Motor Unit. When positioning the Hook [4] and
the Post [1], move the Tension Arm [7] to make it easier.
[A]
[3] [2]
[1] [4] [5]
[6]
[7]

NOTE:

Indicates the Shaft [1] is fitted to the Hook [4] properly.

Indicates the Shaft [1] is disengaged from the Hook [4].
Use care because the Shaft appears as if it is fitted properly when it is looked from above [C], even
when the Shaft is disengaged.
[C] [4]
[1]
[4]