Canon
Canon imagePRESS C800/C700 Service Guide
U.
Soft Counter
The imagePRESS C800/C700 Series uses soft counters to track its functional
copy use. The control panel can display up to eight (8) counters on the
counter status check screen (when the counter check key button on the
control panel is pressed). By default, the imagePRESS C800/C700 displays
six (6) counters on the counter status check screen.
The Table below indicates the default counter configurations of the
imagePRESS C800/C700 Series on the counter status check screen.
Refer to the imagePRESS C800/C700 Series Service Manual for complete
details on the Soft Counter configurations.
Table 45 – Soft Counter
Counter
Counter Description
(from Service Manual)
Default
Display
Adjustability of Display
1
101: Total 1
On
May be Swapped to different
Total Counter via Service
Mode setting so that the
counter will increment twice
when large paper is used
2
108: Total (Black 1)
On
May be Changed via Service
Mode setting to any
available counter
3
407: Copy
(Full Color + Single Color/Large)
On
4
408: Copy
(Full Color + Single Color/Small)
On
5
403: Print
(Full Color + Single Color/Large)
On
6
404: Print
(Full Color + Single Color/Small)
On
7
Not Displayed
Off
8
Not Displayed
Off
CAUTION
•
After performing a RAM clear, the counter will change to the default
counter configurations above. As a result, the service technician must
note the current soft counter settings before performing the RAM clear
and return the soft counter settings after performing the RAM clear.
•
If Counter 1 is changed to display the 102 counter (count two (2) clicks
for large paper), Counter 2 may need to be changed to display the 109
counter (count two (2) clicks for large B&W paper) to match. However,
you may need to confirm how your backend billing system and service
history obtains the volume of color outputs before making this change.
Canon imagePRESS C800/C700 Service Guide
October 2014
Revision 2
Page 75
Summary of Contents for ImagePress C700
Page 1: ...Canon Service Guide ...
