Canon imagePRESS C650 Quick Manual Download Page 56

56

 Consumables 

 

WARNING

 

• 

 Do not throw toner cartridges or waste toner 
containers into open fl ame, or do not store 
them or printing/copy paper in a place 
exposed to open fl ame. This may cause them 
to ignite, resulting in burns or fi re. 

• 

 Do not store toner cartridges in a place 
exposed to open fl ame. Also, do not throw 
toner cartridges into open fl ame. These may 
cause toner to ignite, resulting in burns or fi re. 

• 

 If you accidentally spill or scatter toner, 
carefully gather the toner particles together 
or wipe them up with a soft, damp cloth in a 
way that prevents inhalation. Never use a 
vacuum cleaner that does not have 
safeguards against dust explosions to clean 
up spilled toner. Doing so may cause a 
malfunction in the vacuum cleaner, or result 
in a dust explosion due to static discharge. 

 

CAUTION

 

• 

 Keep toner and other consumables out of the 
reach of small children. If these items are 
ingested, consult a physician immediately. 

• 

 If toner touches your clothes or skin, wash it 
away with water immediately. Do not use 
warm water, as this may cause toner to fi x, 
resulting in a permanent stain. 

• 

 Do not dismantle the toner cartridge, as 
doing so may cause toner to fl  y out and 
enter your eyes or mouth. If toner gets into 
your eyes or mouth, wash them immediately 
with cold water and immediately consult a 
physician. 

• 

 If toner escapes from the toner cartridge, 
make sure not to ingest the toner or allow it 
to directly touch your skin. If your skin still 
feels irritated after washing it, or you ingest 
toner, consult a physician immediately. 

• 

 When pulling out the waste toner container, 
be careful not to let it fall. This may result in 
injury. 

• 

 When replacing the stamp ink cartridge, be 
careful that your clothes or skin does not get 
stained with ink. If your clothes or skin has 
been stained, immediately wash out the stain 
with water. 

 

IMPORTANT

 

• 

 Store toner cartridges in a cool location, away 
from direct sunlight. 

• 

 Do not store toner cartridges in an upright 
position. 

 Notice 

 Product  Name 

 Safety regulations require the product's name 
to be registered. In some regions where this 
product is sold, the following name(s) in 
parentheses ( ) may be registered instead.  

 imagePRESS C850/C750/C650 (F163000) 

  

 EMC requirements of EC Directive 

 This equipment conforms with the essential 
EMC requirements of EC Directive. We declare 
that this product conforms with the EMC 
requirements of EC Directive at nominal mains 
input 230 V, 50 Hz although the rated input of 
the product is 220 to 240 V, 50/60 Hz. Use of 
shielded cable is necessary to comply with the 
technical EMC requirements of EC Directive. 

 

WARNING

 

 This is a class A product. In a domestic 
environment this product may cause radio 
interference in which case the user may be 
required to take adequate measures. 

 E-Waste  Rule 

 You can see the information about proper 
handling equipment after use in the latest 
User's Guide (HTML manual) from the Canon 
website (http://canon.com/oip-manual). 

 IPv6 Ready Logo 

 

The protocol stack 
included in this 
machine has 
obtained the IPv6 
Ready Logo Phase-2 
established by the 
IPv6 Forum. 
  
  
  
  

 Information Security Standard (IEEE 2600) 

 This machine is compliant with IEEE Std 2600™ 
- 2008 (hereinafter referred to as IEEE 2600), a 
global information security standard for 
multifunction peripherals and printers, and is 
able to achieve the security requirements 
defi ned in IEEE 2600.* 
 For information on how this machine meets the 
security requirements defi ned in IEEE 2600, see 
User's Guide > Managing the Machine > IEEE 
2600 
 * IEEE 2600.2 CC Authentication has not been 
obtained for this machine. 

 Disclaimers 

• 

 The information in this document is subject 
to change without notice. 

• 

 CANON INC. MAKES NO WARRANTY OF ANY 
KIND WITH REGARD TO THIS MATERIAL, 
EITHER EXPRESS OR IMPLIED, EXCEPT AS 
PROVIDED HEREIN, INCLUDING WITHOUT 
LIMITATION, THEREOF, WARRANTIES AS TO 
MARKETABILITY, MERCHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE OF USE, OR 
NON-INFRINGEMENT.
CANON INC. SHALL NOT BE LIABLE FOR ANY 
DIRECT, INCIDENTAL, OR CONSEQUENTIAL 
DAMAGES OF ANY NATURE, OR LOSSES OR 
EXPENSES RESULTING FROM THE USE OF THIS 
MATERIAL. 

  

 About This Manual 

 Screens 

 Screens of the touch panel display used in this 
manual are those taken when the imagePRESS 
C850/C750/C650 has the following optional 
equipment attached to it: 

• 

 Booklet  Trimmer-F1 

• 

 Booklet Finisher-W1 PRO 

• 

 Paper Folding Unit-J1 

• 

 Document Insertion Unit-N1 

• 

 Multi-drawer Paper Deck-C1 

 Note that functions that cannot be used 
depending on the model or options do not 
appear on the touch panel display. 

 Illustrations 

 Illustrations used in this manual are those 
displayed when the imagePRESS C850/C750/
C650 has the following optional equipment 
attached to it: 
 Duplex Color Image Reader Unit-K1,  
 Upright Control Panel-G1, andCopy Tray-R2. 

  

 Trademarks 

 Mac is a trademark of Apple Inc. 
 Microsoft, Windows, Windows Vista, Windows 
Server, Internet Explorer, Excel, and PowerPoint 
are either registered trademarks or trademarks 
of Microsoft Corporation in the United States 
and/or other countries. 
 Other product and company names herein may 
be the trademarks of their respective owners. 
  

Summary of Contents for imagePRESS C650



























































Reviews: