Version 5
imagePRESS C6000 Customer Expectations Document
Page 30
6.15 Perfect Binder-B1
Item
Specifications
Bookbinding Thickness
10 to 200 sheets or up to 1” (25 mm)
Bookbinding Method
Hot glue at spine with wraparound cover
Book Size
5.4” x 8” (138 mm x 203 mm) to 8.5” x 11.7” (216 mm x 297 mm)
Cover Sheet Size
Inserter: 14.3” x 10.1” to 19.1” x 13”
(364 mm x 257 mm to 486 mm x 330 mm)
Drawer: 14.3” x 10.1” to 19.2” x 13”
(364 mm x 257 mm to 487.7 mm 330.2 mm)
Contents Sheet Size
7.1” x 10.1” to 9” x 12.6” (182 mm x 257 mm to 228.6 mm x 320 mm)
*1
Paper Weight
Contents: 17 to 43 lb bond (64 to 163 g/m
2
)
Cover: 34 to 110 lb cover (91 to 300 g/m
2
)
Maximum Binding
Capacity
17 to 20 lb bond (64 to 80 g/m
2
):
10 to 200 sheets
20 to 28 lb bond (81 to 105 g/m
2
): 10 to 150 sheets
28 to 43 lb bond (106 to 163 g/m
2
): 1 to 10 sheets (slip sheet only)
Margin Trimming
Three Sides or No Trimming
Side:
0.26” x 1.9” (6.5 mm x 49.5 mm)
Top/Bottom:
0.26” x 1.5” (6.5 mm x 39.5 mm)
Tray Capacity
10 books of 100 sheets contents
25 books of 10 sheets contents
Warm Up Time
Fewer than 7 minutes
Dimensions (H x W x D)
with Inserter
36.3" x 31.1" x 53.5" (922 mm x 791 mm x 1,360 mm)
Weight
Approximately 697 lb (316 kg)
*1 Vertical to horizontal ratio of the sheet should be 1:1.25 ~ 1.5.
6.16 Booklet Trimmer-C1
Item
Specifications
Margin Trimming Method
Open-End only
Trim Amount
0.08” to 0.78” (2 mm to 20 mm)
Trim Thickness
40 sheets (20 lb bond (80 g/m
2
))
38 sheets (20 lb bond (80 g/m
2
)) + 2 sheets (110 lb cover (300 g/m
2
))
Output Tray Capacity
Conveyor belt - 30 booklets
(or 40 sheets of an LTR booklet (20 lb bond (80 g/m
2
))
Booklet Waste Tray
Capacity
1,500 sheets of trimmed strips
Acceptable Paper Sizes
12” x 18”, 11” x 17”, LGL, LTRR
Acceptable Paper
Weights
17 lb bond to 110 lb cover (64 to 300 g/m
2
)
Power Source
From the finisher.
Dimensions (H x W x D)/
41" x 52 3/8" x 30 3/8" (1,040 mm x 1,330 mm x 770 mm)
(without expansion tray)
Weight
Approximately 335 lb (152 kg)
