background image

3-6

Chapter 3   ScanFront Setup

Web Menu (Administrator Mode)

The following setting items are available from the Web Menu (Administrator Mode). For details, see 

Chapter 4 “Web Menu 

(Administrator Mode)”

.

Hint

From the Web Menu (User Mode), which is available to all users, the configuration of some functions is restricted.

Setting Item

Description

Web Menu 

(Administrator Mode)

Web Menu 

(User Mode)

User Administration

Register new users and edit user settings. From 
User Mode, only the editing of user settings is 
available, and some settings cannot be edited.

Yes 

(See p. 4-6)

Yes, partially. 

(See 

p. 5-4)

Address Book Settings

Register and edit entries in the Shared Address 
Book. From User Mode, you can register and edit 
entries in the My Address Book.

Yes 

(See p. 4-11)

Yes 

(See p. 5-6)

Job Button Settings

Register and edit the Shared Job Button. From 
User Mode, you can register and edit the My Job 
Button.

Yes 

(See p. 4-16)

Yes 

(See p. 5-12)

Device Configuration

Configure the scanner settings.

Network Settings

Confirm the [Device Name] and [IP Address] 
settings of the scanner.

Yes 

(See p. 4-25)

No

Language/Timezone

Set the language displayed on the touch panel and 
the geographic region where it will be used.

Yes 

(See p. 4-25)

No

Device Operation

Set the Auto Logout and Low Power Mode 
settings for users.

Yes 

(See p. 4-25)

No

Login Options

Select the login screen for users.

Yes 

(See p. 4-26)

No

Administrator Settings

Register the password and e-mail address of the 
administrator.

Yes 

(See p. 4-26)

No

Server Settings

Register the mail server, address book server and 
authorization server.

E-mail Server

Register the SMTP server to be used for sending 
e-mail.

Yes 

(See p. 4-29)

No

Authentication Server

Register a domain server that can search users with 
Active Directory.

Yes 

(See p. 4-29)

No

Address Book Server

Register an LDAP server that can search e-mail 
address books.

Yes 

(See p. 4-31)

No

Summary of Contents for Imageformula scanfront 220





























































































































































Reviews: