Canon imageFORMULA DR-M160II, Service Manual

Page: 16 / 36

imageFORMULA DR-M160II Service Guide
imageFORMULA DR-M160II Service Guide June 2014
Page 11
H. Consumable Parts (End-User)
Consumable parts are defined as those parts having a limited yield that will
be reached during a customer’s specific machine operation and should be
replaced as needed. Examples of consumable parts may include but are not
limited to feed rollers, separation rollers, etc. The consumable parts provided
below show an estimated yield to assist in the initial parts/supplies planning.
Note: All consumable parts shown in the below table are for reference
purposes only and are subject to change without notice.
Table 12 – Consumable Parts
Description Item Number
2
Expected Life
5
(sheets)
Remarks
Feed roller MG1-4985-000 200,000
Because of the worn rollers, it
is necessary to replace when
feed errors occur after
cleaning.
Retard roller MG1-4620-010 200,000
2 Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
I. Recommended Replacement Parts
Canon USA recommends that a dealer keep the following parts in stock for
replacement purposes in case of a hardware failure.
Table 13 – Recommended Replacement Parts
Description Item Number
2
Quantity Remarks
Control PCB MG1-4995-000 1
Sub PCB MG1-4601-000 1
Upper Reading Unit MG1-8308-000 1
Lower Reading Unit MG1-8309-000 1 Includes reading guide
Upper Reading Guide MF1-4733-000 1
A reading glass attached
Lower Reading Guide MF1-4734-000 1
Feed motor MH7-1174-000 1
Main motor MH7-1173-000 1
AC adapter MG1-4558-000 1
2 Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
5 Estimated average values in the field, based on the number of sheets separated, not the size of the sheets scanned. Data is
subject to change depending upon many factors including, without limitation, environment, and customer handling of the
scanner equipment.