Canon imageFORMULA DR-G1100 Production Document..., Service Manual

Page: 14 / 35

imageFORMULA DR-G1130/DR-G1100 Series Service Guide
imageFORMULA DR-G1130/DR-G1100 Series Service Guide April 2013
Rev. 1
Page 10
F. Special Tools
In addition to the standard tools used to service these devices, the following
special tools should also be carried in each group of five (5) service technicians
when servicing an imageFORMULA DR-G1130/DR-G1100 Series machine.
Special Tools List (Table 8)
Description Part Number
1
Remarks
Scale adjustment sheet TKM-0348 For the scale adjustment (10 sheets/set)
Density adjustment sheet
TKM-0347
For the density adjustment (10 sheets/set)
Test sheet
TKM-0271
For the general image check (10 sheets/set)
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
G. Consumable Parts
Consumable parts are defined as those parts having a limited yield that will be
reached during a customer’s specific machine operation and should be replaced
as needed. Examples of consumable parts may include but are not limited to feed
rollers, separation rollers, etc. The consumable parts provided below show an
estimated yield to assist in the initial parts/supplies planning.
Note: All consumable parts shown in the below table are for reference purposes
only and are subject to change without notice.
Consumable Parts (Table 9)
Description Item Number
1
Expected Life
3
(sheets)
Pickup roller MG1-4806-000
Approximately
450,000
sheets
Feed roller MA3-0002-000
Retard roller MG1-4814-000
Separation cover MF1-4799-000
Approximately
6,000,000
sheets
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
3
Estimated average values in the field, based on the number of sheets separated, not the size of the sheets scanned. Data is subject
to change depending upon many factors including, without limitation, environment, and customer handling of the scanner
equipment.