manualshive.com logo in svg

Canon imageFORMULA DR-6030C, User Manual

Share
Download
Canon imageFORMULA DR-6030C User Manual Download Page 112

106

Appendices

Cleaning the Shading Boards

The shading boards are the white standard boards located behind the platen 
rollers. A dirty shading board may alter scanned colors or cause marks on the 
images.

1.

Turn ON the power.

2.

Hold the upper unit as shown in the diagram, and open it slowly until it stops.

CAUTION
The pickup roller is located in the middle of the upper unit. Do not 
hold the protrusion on the upper unit when you open it. Doing so 
may deform the pickup roller or cause a feeding error.

IMPORTANT

Be sure to open the upper unit until it stops. If it is not opened all the way, the 
shading boards cannot come out.

3.

Press the start button for about two seconds.
The shading boards come out above the platen rollers (upper and lower).

4.

Wipe the only surface of the shading boards with a firmly wrung cloth 
moistened with water.

CAUTION
Wipe both the upper and lower shading boards.

Shading Boards

Summary of Contents for imageFORMULA DR-6030C


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands