manualshive.com logo in svg

Canon imageFormula CR-150, User Manual

Share
Download
Canon imageFormula CR-150 User Manual Download Page 55

55

Check Path Cleaning

Follow the procedures below to perform check path cleaning.

A

Confirm that the scanner is set to the cleaning mode. (See 
“Prepare for the Cleaning mode,” on p. 54)

B

Press the Separation OFF Mode Button.

C

Place the cleaning card (for Check Path Cleaning) in the 
document tray.

D

Press the START Button to start cleaning.

E

Please repeat steps 3 and 4.

A typical cleaning is feeding the cleaning card 3 to 7 times. If the 
scanner is extremely dirty, you may need to use another cleaning 
card.

F

Turn OFF the scanner.

NOTE

Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from 
the cleaning card to thoroughly dry before scanning documents.

Card Path Cleaning

Follow the procedures below to perform card path cleaning.

A

Confirm that the scanner is set to the cleaning mode. (See 
“Prepare for the Cleaning mode,” on p. 54)

B

Press and hold the FUNCTION Button.

Press and hold the Function button for at least 2 seconds, and then 
release it.

If the scanner is set to the Card Path Cleaning mode properly, the 
POWER LED and the START LED continues to blink.

Separation OFF 
Mode Button

Summary of Contents for imageFormula CR-150






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands