8
Load Paper
1
Pull out the paper drawer until it stops.
2
Push down the metal plate to lock.
If you load LTR size paper, go to step , or otherwise go to step .
3
Detach the end guide (A) by pressing it down. Reattach
the end guide into the desired paper size slots and tilt it
backwards to its original upright position.
4
Lift the lock lever on the side guide to the upright
position and slide the side guide to the groove marked for
the desired paper size.
5
Lower the lock lever to the left to lock the side guide.
Be sure to set the lock lever correctly. If the lock lever is
positioned incorrectly, the wrong paper type will be shown on
the touch panel display. This may also cause paper jams, dirty
prints, etc.