Install the software.
IMPORTANT
●
Do not connect the USB cable before installing the software. If you connect the USB cable before installing the
software and the Found New Hardware Wizard screen appears, click [Cancel] and disconnect the USB cable.
●
Network Connection is not available for this model. If you selected [Network Connection] by mistake, go back to
the previous screen by clicking [Back], and select [USB Connection].
NOTE
●
The instructions below are for Windows XP/Server 2003. For Windows 98/Me/2000, see the
Software Guide
(included in
the User Software CD).
●
For Windows 2000/XP/Server 2003, log on as Administrator to install the software.
1
Turn on your computer.
2
Quit any open applications, including aniti-virus
software.
3
Insert the User Software CD into the CD-ROM drive.
4
When the MF Setup screen appears, click
[USB Connection].
NOTE
●
If the MF Setup screen is not displayed, on the Windows desktop, click [start]
➝
[My Computer]. Open the CD-ROM icon, then double-click
[Setup (Setup.exe)].
5
Click [Install Drivers].
NOTE
●
If you would like to install the Presto! PageManager file management software
and/or OmniPage SE OCR software, click [Install Applications] and follow the
instructions on the screen.
●
You can also click [Read Manuals] on this screen to read PDF manuals.
6
Click [Install MF Drivers].
7
When the MF Drivers-Setup Wizard screen
appears, click [Yes] and follow the instructions
on the screen.
E227ME (MF5730) US2 SI.qxd 2/1/05 11:57 AM Page 6
