1-4
Setting the wireless LAN
2.
Press [
] (Menu).
1.
Make sure the procedure “Step2 Switching the
Connection Method to Wireless LAN” (P.1-2) is
completed.
3.
Press [
] or [
] to select, and press [OK].
The next screen is displayed for approximately
5 seconds.
You do not need to turn the machine OFF and
ON at this stage.
6.
Press [
] or [
] to select, and press [OK].
7.
Press [ ] to select, and press [OK].
8.
Within
2 minutes
, press and hold the WPS button
on the wireless LAN router or access point for
approximately 5 seconds.
Wireless LAN Settings
WPS Push Button Mode
WPS PIN Code Mode
SSID Settings
Wireless LAN Informa
...
Do you want to
connect with new
settings?
No
Yes
Searching...
Press the access
point WPS button.
Cancel: Press Stop
Connecting...
Cancel: Press Stop
Menu
Network Settings
Preferences
Timer Settings
Common Settings
Settings effective
after power is
turned OFF and ON.
4.
Press [
] or [
] to select, and press [OK].
Network Settings
Select Wired/Wirele
...
Wireless LAN Setting
TCP/IP Settings
SNMP Settings
5.
Press [OK].
See Wireless LAN
Setting Guide to
perform settings.
OK
Follow this procedure only if you selected Step4-A “Setting the Machine Using the WPS (Push Button Mode)” on the
previous page.
Step4-A
Setting the Machine Using the WPS (Push Button Mode)
If “Cannot find access point” is displayed.
Press [OK] to close the screen and resume from
Step
6
.
Summary of Contents for ImageCLASS MF4570dw
Page 2: ......