background image

6-24

U

sing the F

ax F

unc

tions

 5

 Press 

[

] or [

] to select <TX Start Speed>, and 

then press [OK]. 

  

 

 

Fax Settings

 TX Start Speed

 RX Start Speed

 

 6

 Press 

[

] or [

] to select the send start speed, 

and then press [OK]. 

  

 

 

 TX Start Speed

  33600 bps

  14400 bps
  9600 bps
  7200 bps

 

 *  When <Apply> appears in the screen, you must select <Apply> 

and press [OK] after specifying the setting. 

 7

 Press 

[

] (Menu) to close the menu 

screen. 

 The setting is complete. 

   Setting  Items 

 The following system management settings are available. 

System Settings

Communications 
Settings 

Fax Settings 

  “TX Start Speed” (

P.6-24)

  “RX Start Speed” (

P.6-24)

  “Memory Lock Settings” (

P. 6-24)

  “Select Country/Region” (

P.6-24)

Restrict Sending

  “Address Book PIN” (

P.6-25)

  “Restrict New Destinations” (

P.6-25)

  “Allow Driver Faxing” (

P.6-25)

  “Restrict Sending From History” (

P.6-25)

  “Fax No. Confirmation Re-Entry” (

P.6-25)

  “Restrict Sequential Broadcast” (

P.6-25)

   TX  Start  Speed 

 Change the transmission start speed if you have difficulty 
starting a fax transmission. 

 How to display the settings 

  

  [

] (Menu) 

 <System Management Settings> 

 <Communication Management Settings> 

 <Fax 

Settings> 

 <TX Start Speed> 

 Settings 

 (Bold: Default settings) 

33600 bps

, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps

   RX  Start  Speed 

 Specify the receive start speed if you have difficulty 
receiving faxes. 

 How to display the settings 

  

  [

] (Menu) 

 <System Management Settings> 

 <Communication Management Settings> 

 <Fax 

Settings> 

 <RX Start Speed> 

 Settings 

 (Bold: Default settings) 

33600 bps

, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps

   Memory  Lock  Settings 

 Normally, received documents are immediately printed. 
However, you can specify whether or not to store received 
faxes in memory before printing. You can then print the 
stored faxes at any time or delete them without printing to 
save paper. 

 How to display the settings 

  

  [

] (Menu) 

 <System Management Settings> 

 

<Communication Management Settings> 

 <Memory 

Lock Settings> 

 Settings 

 (Bold: Default settings) 

Off

Does not use the Memory Lock mode.

On

Memory 
Lock PIN: 
Seven-digit 
number

If you set a PIN, it will be necessary to 
enter the PIN whenever you want to 
change the Memory Lock mode settings, 
or cancel the Memory Lock mode.

Print Report: 
Off, 

On

You can specify whether or not to print 
the receive results when receiving a fax.
To use this feature, you must also 
activate the “Receive Results” feature.

Memory 
Lock Time: 

Off

, On

If you specify <On>, documents are 
received in the memory only within a 
specified time.
Enter <Memory Lock Start Time> and 
<Memory Lock End Time> respectively.

   NOTE 

 Memory Lock PIN 

•   If you do not want to set the PIN, press [OK] without entering 

any numbers. 

•   You cannot register consecutive digits that consist of only “0” as a 

PIN, such as <0000000>. 

•   If you register a number that starts from <0>, the PIN changes 

as follows. 
 Example: When you enter <02> or <002>, the PIN is specified as 
<0000002>. 

  

   Select  Country/Region 

 Specify the country or region where the machine is to be 
used. 

 

 IMPORTANT 

 After  configuration 

 Restart the machine to activate the settings. 

  

 How to display the settings 

  

  [

] (Menu) 

 <System Management Settings> 

 

<Select Country/Region> 

 Settings 

 (Bold: Default settings) 

UnitedStates (US)

, Canada (CA), 

Brazil (BR), Mexico (MX), Other

Summary of Contents for imageCLASS MF4450





































































































































































Reviews: