manualshive.com logo in svg

Canon imageCLASS MF273dw, User Manual, Page: 389 / 633

Share
Download
Canon imageCLASS MF273dw User Manual Download Page 389

[Display Settings]

94LS-09U

Configure the operation panel screen displays.

* Values in bold red text are the default settings for each item.

[Default Screen after Startup/Restoration](P. 380) 
[Button Display Order on Home Screen](P. 380) 
[Language](P. 381) 
[Remote UI Language](P. 381) 
[Millimeter/Inch Entry Switch](P. 381) 
[Gram/Pound Switch](P. 381) 

 

[Displ. Timing for Cartridge Prep. Notif.]

(P. 382) 

[Show Warnings](P. 382) 
[Action When Warning](P. 382) 
[Display IP Address](P. 382) 
[Notify to Clean Original Scanning Area]

(P. 383) 

[Default Screen after Startup/Restoration]

[Menu]   [Preferences]   [Display Settings]

Specify the screen displayed after the start screen appears when the machine is turned ON and immediately after an

Auto Reset.

Setting this for the [Status Monitor] enables you to also specify the screen displayed immediately after the [Status

Monitor] screen is closed.

[

Home

]

 
[Copy]
 
[Fax]

*1

 
[Scan]
 
[Status Monitor]

[

Home

]

[Copy]
[Fax]

*1

[Scan]

*1 

May not be displayed depending on the model, the installed options, and other settings.

[Button Display Order on Home Screen]

[Menu]   [Preferences]   [Display Settings]

Rearrange the buttons or change the display order of the items so that you can run frequently used functions more

quickly from the [Home] screen of the operation panel.  Customizing the [Home] Screen(P. 126) 

Touch Panel Model

[Set Display Order]
 
[Insert and Delete Blank]

Settings Menu Items

380

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Reviews:

No comments