Canon imageCLASS MF273dw User Manual Download Page 378

Page: 378 / 633

Updating the Firmware (5 Lines LCD Model)

94LS-0J8

When functions are added or the software version is upgraded, the firmware of the machine is updated.

Check the version of the firmware, and update the firmware via the Internet or a computer according to the usage

environment of the machine.

: Can be updated

: Cannot be updated

Usage environment of the machine Connection via Internet Connection via computer

Wired LAN connection

Wireless LAN connection

USB connection

Use IPv6

* You cannot update the firmware in an IPv6 Environment. Connect the machine to a computer via USB, and update

from the computer.

Checking the Firmware Version(P. 369)
Updating the Firmware via the Internet(P. 370)
Updating the Firmware via a Computer(P. 370)

Checking the Firmware Version

Check the current version of the firmware before updating it, and then check the version after updating to see if the

update was performed correctly.

This section describes how to check the firmware version using the operation panel.

You can also use Remote UI from a computer to check the firmware version. Managing the Machine from a

Computer (Remote UI)(P. 349)

Administrator privileges are required.

On the operation panel, select [Menu] in the [Home] screen, and press

. [Home]

Screen(P. 113)

Press [Management Settings]

[Remote UI Settings/Update Firmware]

[Update Firmware]

➠

The [Update Firmware] screen is displayed.

If the login screen appears, enter the System Manager ID and PIN, and then press

. System Manager

ID and PIN(P. 5)

Select [Version Information], and press

➠

Displays the current version of the firmware.

Managing the Machine

369

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands

Canon imageCLASS MF273dw, User Manual

Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands