Canon imageCLASS MF273dw User Manual Download Page 304

Page: 304 / 633

Tap [Printer], and select the machine.

Configure the print settings.

The available settings and usable paper sizes vary depending on the application you are using.

Tap [Print].

➠

Printing starts.

Use

or [Status Monitor] on the operation panel to view the print job status and log. Viewing the Print

Job Status and Log(P. 198)

When Using a Mac

You can use AirPrint to print and scan data and send faxes from a Mac connected to the network on the same LAN as

the machine or a Mac connected to the machine via USB.

Operating Environment

You can use AirPrint on a Mac with the following operating systems installed:

●

Printing: OS X 10.7 or later

●

Scanning: OS X 10.9 or later

●

Sending faxes: OS X 10.9 or later

When printing from a Mac connected to the machine via USB, OS X 10.9 or later.

When scanning with TLS encrypted communication, OS X 10.11 or later.

Required Preparations

●

Set the machine to enable use of AirPrint. Preparations for Using AirPrint(P. 285)

●

Connect the machine to a Mac. Setting Up the Network(P. 50)
When connecting via USB, connect to the USB port for computer connection on the back of the machine with
a USB cable. Rear Side(P. 11)

●

In [System Preferences] [Printers & Scanners] on the Mac, click [+] to register the machine.

Using AirPrint to Print Data(P. 295)
Using AirPrint to Scan Data(P. 296)
Using AirPrint to Send Faxes(P. 297)

◼

Using AirPrint to Print Data

Open the document you want to print on your Mac.

In the application used to open the document, click [Print].

➠

The printing dialog box appears.

Linking with Mobile Devices

295

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands

Canon imageCLASS MF273dw, User Manual

Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands