Canon imageCLASS MF273dw User Manual Download Page 140

Page: 140 / 633

When scanning tracing paper, transparencies, and other transparent originals, place a sheet of plain white

paper on top.

Gently close the feeder or the platen glass cover.

When scanning of the original is complete, remove the original from the platen glass.

Placing Originals in the Feeder

When scanning two or more sheets of originals, place only originals of the same size.

For the size of the originals that can be placed in the feeder, see the specifications of the feeder. Feeder

Specifications(P. 28)

To prevent paper jams inside the feeder, do not place the following originals:

●

Wrinkled, creased, curled, rolled, or torn paper

●

Carbon paper, coated paper, thin translucent paper, thin paper, or transparencies

●

Stapled or clipped paper

●

Paper printed by a thermal transfer printer

Open the original supply tray.

Spread the slide guides outward until they are slightly farther apart than the width
of the original.

Basic Operations

131

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands

Canon imageCLASS MF273dw, User Manual

Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands