manualshive.com logo in svg

Canon imageCLASS MF264dw, User Manual, Page: 637 / 700

Share
Download
Canon imageCLASS MF264dw User Manual Download Page 637

A Message Appears

8W0J-0HE

If a message appears on the control panel, select the message from the list below, and check how to troubleshoot the

problem.

A counterfeit or non-Canon drum cartridge may be in use. The amount remaining in the cartridge cannot

be displayed correctly.(P. 629) 

A counterfeit or non-Canon toner cartridge may be in use. The amount remaining in the cartridge cannot

be displayed correctly.(P. 629) 

Cannot analyze the authentication server certificate.(P. 629) 
Cannot change the destination type of any destination that is registered to a group.(P. 630) 
Cannot find the access point.(P. 630) 
Cannot print RX data.(P. 631) 
Cannot receive the fax. Make sure the fax was sent correctly by the sender.(P. 631) 
Cannot send because more than one destination is specified.(P. 631) 
Cannot specify a group.(P. 631) 
Change the authentication password.(P. 632) 
Check the authentication settings.(P. 632) 
Could not connect using the wireless LAN.(P. 632) 
Could not connect using WPS.(P. 632) 
Could not connect.(P. 633) 
Could not connect. Check the encryption key settings.(P. 633) 
Could not connect. Max no. of devices that can connect to access point reached(P. 633) 
Could not detect any connections from wireless devices.(P. 633) 
Could not perform cleaning.(P. 634) 
Could not perform IEEE 802.1X authentication. Cannot analyze the authentication server certificate.

(P. 634) 

Could not perform IEEE 802.1X authentication. Change the authentication password.(P. 634) 
Could not perform IEEE 802.1X authentication. Check the authentication settings.(P. 634) 
Could not perform IEEE 802.1X authentication. Configure the correct authentication information.(P. 634) 
Could not perform IEEE 802.1X authentication. Configure the information required for authentication.

(P. 634) 

Could not perform IEEE 802.1X authentication. No reply from the destination.(P. 635) 
Could not perform IEEE 802.1X authentication. The authentication server certificate has expired.(P. 635) 
Could not perform IEEE 802.1X authentication. The authentication server certificate is incorrect.(P. 635) 
Could not perform Shared Key auth. Chk encryp. key set.(P. 635) 
Direct Connection terminated.(P. 636) 
Drum cart. life end. Replcmt. recommended.(P. 636) 
Drum cart. reached end of lifetime.(P. 636) 
Easy Conn. via PC ended due to timeout Device will restart.(P. 636) 
Encryption key is not set correctly. Check the encryption key settings.(P. 636) 
IEEE 802.1X error. Cannot analyze auth. server certificate.(P. 637) 
IEEE 802.1X error. Change the auth. password.(P. 637) 
IEEE 802.1X error. Check the auth. settings.(P. 637) 
IEEE 802.1X error. Configure correct authentication info.(P. 637) 
IEEE 802.1X error. Configure the info. required for auth.(P. 637) 
IEEE 802.1X error. No reply from the destination.(P. 637) 
IEEE 802.1X error. The auth. server cert. has expired.(P. 638) 
IEEE 802.1X error. The auth. server cert. is incorrect.(P. 638) 
Incorrect number of characters/invalid characters entered.(P. 638) 
Insert the drum cartridge.(P. 638) 
Insert the toner cartridge.(P. 638) 
Memory is full.(P. 638) 

Troubleshooting

628

Summary of Contents for imageCLASS MF264dw





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments