manualshive.com logo in svg

Canon imageCLASS MF264dw, User Manual, Page: 638 / 700

Share
Download
Canon imageCLASS MF264dw User Manual Download Page 638

No reply from the destination.(P. 639) 
No response from host.(P. 639) 
Paper jammed.(P. 639) 
Preparing a drum cart. is recommended.(P. 639) 
Preparing a toner cart. is recommended.(P. 639) 
Set the correct authentication information.(P. 640) 
Set the information necessary for authentication.(P. 640) 
Size/Settings Mismatch(P. 640) 
Specifying and registering new destinations is restricted.(P. 641) 
The authentication server certificate has expired.(P. 641) 
The authentication server certificate is incorrect.(P. 641) 
The fax number has too many digits.(P. 641) 
The memory is full. Scanning will be canceled. Do you want to print?(P. 641) 
Toner cart. life end. Replcmt. recommended.(P. 642) 
Toner cart. reached end of lifetime.(P. 642) 
Use Remote UI to set info. necessary for authentication.(P. 642) 

●

If the problem persists even after trying the troubleshooting methods, contact your dealer or service
representative.  If the Problem Persists(P. 651) 

A counterfeit or non-Canon drum cartridge may be in use. The amount
remaining in the cartridge cannot be displayed correctly.

The remaining amount of drum cartridge is not correctly displayed due to the use of a drum cartridge whose print

quality cannot be guaranteed.

Replace with a New Drum Cartridge.

Replacing the Drum Cartridge(P. 536) 

For optimum print quality, using Canon genuine drum cartridges is recommended.   List of

Consumables(P. 541) 

A counterfeit or non-Canon toner cartridge may be in use. The amount
remaining in the cartridge cannot be displayed correctly.

The remaining amount of toner cartridge is not correctly displayed due to the use of a toner cartridge whose print

quality cannot be guaranteed.

Replace with a New Toner Cartridge.

Replacing the Toner Cartridge(P. 532) 

For optimum print quality, using Canon genuine toner cartridges is recommended.   List of

Consumables(P. 541) 

Cannot analyze the authentication server certificate.

The certificate of the authentication server may not be correct, or it may be a format unsupported by the machine.

Check the Certificate of the Authentication Server, and Change the Setting, as Needed.

 Setting IEEE 802.1X(P. 362) 

Troubleshooting

629

Summary of Contents for imageCLASS MF264dw





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments