manualshive.com logo in svg

Canon imageCLASS MF264dw, User Manual, Page: 527 / 700

Share
Download
Canon imageCLASS MF264dw User Manual Download Page 527

Maintenance

8W0J-0CA

To ensure safe and convenient use of the machine, daily maintenance that includes cleaning and replacement of

consumables is required.

If you notice a deterioration in the print quality or frequent paper jams, perform cleaning and adjustment to improve

it.

Performing Maintenance Operations

In addition to performing regular maintenance, operations are required according to the machine status and

print quality.

Cleaning

Regularly clean the various parts of the machine. If the original or paper becomes dirty, or the print quality

has deteriorated, clean the parts causing the problem according to the symptoms.

Cleaning the Machine(P. 520) 

Replacing Consumables

If a message about consumables appears on the screen of the control panel or Remote UI, or the print

quality deteriorates, replace the consumables.

Replacing Consumables(P. 531) 

Changing the Installation Location

When moving the machine, perform the prescribed procedure to prevent accident or damage.

Moving the Machine(P. 544) 

Maintenance and Inspections

●

The minimum holding period for performance parts for repairs, toner cartridges, and drum cartridges is
seven (7) years after production of the machine model is discontinued.

●

If a problem occurs during operation, see the following:

Troubleshooting(P. 548) 

 If the problem still cannot be resolved or you think the machine needs to be checked, contact your dealer or

service representative.  If the Problem Persists(P. 651) 

Installation

●

If you find the machine's operation to be noisy in some operating modes or due to your surroundings, we
recommend setting up the machine in a separate location from your office.

●

Water droplets (condensation) may form inside the machine if the room where the machine is installed is
heated rapidly, or if the machine is moved from a cool, dry location to a warm, humid location. Using the
machine under these conditions may result in problems such as paper jams, poor print quality, or faults. Let
the machine adjust to the ambient temperature and humidity for at least two hours before use.

●

Machines with storage devices such as hard disks may not operate properly when used at high altitudes
(3,280 yards (3,000 meters) above sea level or higher).

◼

See Also

Checking the Required Troubleshooting Solutions from the Symptoms

You can check the required maintenance operations and settings according to the status of the machine and

the error description.

Paper Jams(P. 549) 

Problems with Printing Results(P. 559) 

Paper and Paper Feeding Problems(P. 585) 

Viewing the Number of Printed Pages and Machine Usage

Maintenance

518

Summary of Contents for imageCLASS MF264dw





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments