Canon imageCLASS LBP913w, User Manual

Page: 97 / 327

Loading Envelopes
27WS-022
Make sure to flatten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes
and which side is face up.
Before Loading Envelopes(P. 92)
Loading Envelopes in the Drawer(P. 93)
● This section describes how to load envelopes in the orientation you want, as well as procedures that you
need to complete before loading envelopes. For a description of the general procedure for loading
envelopes in the drawer, see Loading Paper in the Drawer(P. 89) .
Before Loading Envelopes
Follow the procedure below to prepare the envelopes before loading.
1
Close the flap of each envelope.
2
Flatten them to release any remaining air, and make sure that the edges are pressed
tightly.
3
Loosen any stiff corners of the envelopes and flatten any curls.
4
Align the edges of the envelopes on a flat surface.
Basic Operations
92