Canon imageCLASS LBP913w, User Manual, Page: 42 / 327

Setting IPv4 Address
27WS-00U
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addressing protocol, such as DHCP, or entered manually. You can test the network
connection if necessary.
Setting IPv4 Address(P. 37)
Testing the Network Connection(P. 38)
Setting IPv4 Address
1
Select <Menu> in the Home screen. Home Screen(P. 80)
2
Select <Network Settings>.
● If the screen for entering a PIN appears, enter the correct PIN. Setting the System Manager PIN(P. 132)
3
Select <TCP/IP Settings> <IPv4 Settings> <IP Address Settings>.
4
Configure IP address settings.
<Auto Acquire>
Select to automatically assign an IP address via DHCP protocol. When <On> is displayed, automatic
addressing is enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this option,
the automatic acquirement must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Automatically assigning an IP address
1
Select <Auto Acquire>.
2
Select the protocol.
● Select <Select Protocol> <DHCP>.
If you do not want to use DHCP/BOOTP/RARP to assign an IP address
Setting Up
37