Canon imageCLASS LBP913w, User Manual

Page: 175 / 327

Updating the Firmware
27WS-03U
For the firmware, select the method of update depending on the installation condition of the machine. There are two
methods of update: the one is to access the latest firmware version on the Internet from the machine and perform the
update if the version currently installed in the machine is not the latest, and the other is to access the latest firmware
version on the Internet from a computer and perform the update from the computer if the version currently installed
in the machine is not the latest. In an environment where connection to the Internet cannot be established via a
wireless LAN, establish connection via USB and perform the update from the computer.
Installation Condition of the Machine How to Install the Update
Wireless LAN connection Updating via the Internet(P. 170)
USB connection Updating from a Computer(P. 171)
● If you are in an IPv6 environment, you cannot perform firmware update. Use USB to re-establish connection,
and perform the update from the computer.
Checking the firmware version
● You can check the firmware version from the operation panel of the machine. After completion of the
firmware update operation, make sure that the update was performed correctly. Checking the Firmware
Version(P. 171)
Updating via the Internet
You can access the Canon server from the machine to update the firmware to the latest version.
1
Select <Menu> in the Home screen. Home Screen(P. 80)
2
Select <System Management Settings>.
● If the screen for entering a PIN appears, enter the correct PIN. Setting the System Manager PIN(P. 132)
3
Select <Update Firmware>.
4
Select <Via Internet>.
➠
A check for existence of the latest firmware is performed.
● If the <This is the latest firmware version.> message is displayed, there is no need to update the firmware.
Managing the Machine
170