Canon imageclass LBP251dw User Manual Download Page 402

Page: 402 / 495

Replacing Toner Cartridges

0W20-067

The machine will display a message when a toner cartridge is nearly empty. Note that the print quality becomes poor if

you continue printing without taking any action. You can check the amount remaining in the toner cartridge on the

display.

When a Message Appear(P. 396)
If Printouts are Poor in Quality(P. 396)
Checking the Amount Remaining in the Toner Cartridge(P. 397)

◼

When a Message Appear

Depending on which message is displayed, you will need to make sure that you have a replacement toner cartridge

ready or replace the toner cartridge. How to Replace Toner Cartridges(P. 400) Consumables(P. 443)

<Prepare a cartridge.>

This message notifies you that a toner cartridge needs to be replaced soon. Make sure that you have a

replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print

a large job.

When this message is displayed

●

You can continue printing the document.

Specify when this message is displayed

●

You can set any value as the percentage of the amount remaining in the toner cartridge that triggers
this message. Display Timing for Cartridge Preparation Notification (P. 332)

<Cart. end of lifetime. Rplcmt. recommended.>

This message notifies you that a toner cartridge has reached the end of its lifetime. It is recommended that you

replace the cartridge with a new one. You can continue printing, but the print quality cannot be guaranteed.

◼

If Printouts are Poor in Quality

If your printouts begin to show any of the following features, one of your toner cartridges is consumed. Replace the

nearly empty toner cartridge even if no message is displayed.

How to Replace Toner Cartridges(P. 400)

Maintenance

396

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands