Canon imageCLASS LBP121dn User Manual Download Page 306

Page: 306 / 388

Paper Creases

95LW-077

Troubleshoot by checking the items below.

Is Paper Loaded Correctly?

●

Make sure the loaded paper does not exceed the load limit line (

●

Check that the paper guides are aligned with the markings and are not too loose or too tight.

Are You Using Paper That Has Absorbed Moisture?

Check the precautions, and replace the paper with dry paper.

Precautions When Handling Paper(P. 16)

Loading Paper(P. 87)

Are You Using Appropriate Paper?

Check whether the paper in the machine is usable, and replace it with appropriate paper, as needed.

Usable Paper(P. 13)

Loading Paper(P. 87)

Troubleshooting

299

Summary of Contents for imageCLASS LBP121dn





































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands

Canon imageCLASS LBP121dn, User Manual

Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands