Canon imageCLASS LBP121dn, User Manual

Page: 240 / 388

[Image Refinement]
[Menu] [Function Settings] [Printer] [Printer Settings] [Print Quality]
Specify whether to use smoothing processing that will produce smoother printed outlines in text and figures.
[Off]
[
On ]
[Output Adjustment Mode]
[Menu] [Function Settings] [Printer] [Printer Settings] [Print Quality]
Specify the resolution for printing. To print at a higher resolution, specify [On].
* Selecting [On] decreases the printing speed.
[ Off ]
[On]
[Layout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the gutter direction or margin and the print position.
[Binding Location]
[Menu] [Function Settings] [Printer] [Printer Settings] [Layout]
Specify whether the gutter will be on the long edge or the short edge when the printed document will be
bound using a method such as staples.
Use this setting in conjunction with the [Gutter] setting to adjust the binding position and margins. [Gutter]
(P. 233)
● To bind the paper on the long edge, specify [Long Edge] in this setting.
● To bind the paper on the short edge, specify [Short Edge] in this setting.
[ Long Edge ]
[Short Edge]
[Gutter]
[Menu] [Function Settings] [Printer] [Printer Settings] [Layout]
Offset the print position to adjust the width of the margin that will form the gutter.
Specify the offset width in 0.5 mm increments in the plus (+) or minus (-) offset direction, in accordance with the
edge specified in [Binding Location]. [Binding Location](P. 233)
If [Binding Location] is set to [Long Edge]
Settings Menu Items
233