Canon imageCLASS LBP121dn User Manual Download

Page: 11 / 388

System Manager ID and PIN

95LW-002

The machine has a System Manager Mode for viewing and changing important settings.

When System Manager ID and System Manager PIN are set, only those users who know this information are able to

log into System Manager Mode.

By default, the System Manager ID and System Manager PIN are not set.

System Manager Mode is disabled, allowing anyone to see and change important settings. Set the System Manager ID

and System Manager PIN to protect the information, and allow only certain administrators of this information.

For details about how to change and set the System Manager ID and System Manager PIN, see the following:

Setting the Department ID and PIN for the Administrator(P. 144)

About the Machine

Summary of Contents for imageCLASS LBP121dn





































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands

Canon imageCLASS LBP121dn, User Manual

Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands