Canon imageCLASS D550, Basic Operation Manual

Page: 50 / 116

3-2
C
op
ying
This section describes the basic procedure for copying.
1
Place documents.
“Placing Documents” (
→
P.2-4)
“Document Requirements ” (
→ P.2-2)
* A maximum of 50 pages can be loaded into the feeder.
2
Press [ ]. (Copy/Scan) until the copy
mode screen appears.
3
Specify the copy settings as needed.
You can specify up to 7 items.
(for details, see P.3-3 to P.3-6 .)
Density
Image quality
2-Sided
Enlarged/reduced
Reduced layout
Collating
Sharpness
The settings that are specified here apply only to
copy operation which you are currently performing.
To apply the valid settings for all copy operations, see
“Changing the Default Values” (
→ P.3-9).
4
Enter the desired copy quantity.
(1) Press [ ] or [ ] to select <No. of Copies>, and then press [OK].
(2) Press [ ] or [ ] to enter the desired copy quantity (1 to 99),
and then press [OK].
5
Press [ ] (Start).
Basic Copying Method