Canon imageCLASS D550, Basic Operation Manual

Page: 34 / 116

2-4
Document and P
aper Handling
This section describes placing the documents on the platen
glass or loading them in the feeder.
Placing Documents on the Platen Glass
1
Open the feeder.
2
Place a document face down.
3
Align the document with the appropriate paper
size marks.
If your document does not match any of the paper size marks, align
the center of your document with the arrow mark.
A4
B4
A5
A5
B4
A4
4
Close the feeder gently.
The machine is ready to scan the document.
When scanning is complete, remove the document from the
platen glass.
Loading Document in the Feeder
1
Spread the document guides a little wider than
the document width.
2
If loading large-sized documents, pull out the tray
extension.
Pull out the tray extension when the document is hanging out of
the document feeder tray.
Placing Documents
CAUTION
Precautions when closing the feeder
• Be careful not to get your fingers caught. This may
cause personal injury.
• Do not press down the feeder forcefully. This may
damage the platen glass and cause personal injury.