Canon imageCLASS 1100, Service Manual, Page: 866 / 965

COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
13-277
CHAPTER 13 TROUBLESHOOTING
HV-SP-AC COPIER>ADJUST
Adjusts the separation charging AC high-voltage output by condition.
Level 3
HV-SP
(Note 1)
SP-N1
SP-N2
SP-T1
SP-T2
SP-UT1
SP-UT2
SP-S1-1
SP-S2-1
SP-OHP
SP-POST
SP-L1
SP-L2
(Note 1)
Remarks
-4 to +4
Unit: 0.5 kV
-4 to +4
Unit: 0.5 kV
The copier may be adapted to
the site of installation
(temperature, humidity) by
changing its various settings.
For this mode, you will find
settings grouped into three
zones (A, B, C). On the Level
3 item screen (page 1), be
sure to adjust Level 3 items of
the appropriate zones (TEMP,
ABS-HUM).
Division by Moisture Content
Zone A: 0 to 6.17 g
Zone B: 6.18 to 18.40 g
Zone C: 18.41 g or more
Description
Use it to adjust the separation AC high-voltage
output.
Use it to adjust the separation charging bias for
single-sided copying and copying on the 1st side of a
double-sided copy using plain paper.
Use it to adjust the separation charging bias for
copying on the 2nd side of a double-sided copy
using plain paper.
Use it to adjust the separation charging bias for one-
sided copying and when copying on the 1st side of a
double-sided copy using thick paper.
Use it to adjust the separation charging bias when
copying on the 2nd side of a double-sided copy
using thick paper.
Use it to adjust the separation charging bias for
single-sided copying and when copying on the 1st
side of a double-sided copying using extra thick
paper.
Use it to adjust the separation charging bias when
copying on the 2nd side of a double-sided copy
using extra thick paper.
Use it to adjust the separation charging bias for
single-sided copying and copying on the 1st side of a
double-sided copy using special paper 1.
Use it to adjust the separation charging bias for
single-sided copying and copying on the 1st side of a
double-sided copy using special paper 2.
Use it to adjust the separation charging bias when
using transparencies.
Use it to adjust the separation charging bias when
using postcards.
Use it to adjust the separation charging bias for
single-sided copying and when copying on the 1st
side of a double-sided copy using thin paper.
Use it to adjust the separation charging bias when
copying on the 2nd side of a double-sided copy
using thin paper.
Note 1: Execute this mode upon replacement of a CPU PCB or initialization of the RAM. The settings
will be returned to standard settings, requiring you to enter the appropriate settings. Be sure to
record any new settings on the service label.