manualshive.com logo in svg

Canon image Prograf iPF780 Series, User Manual

The Canon imagePROGRAF iPF780 Series Basic Manual is a comprehensive guide that offers detailed instructions and insights for getting the most out of your printer. It is available for download free of charge from manualshive.com, providing users with easy access to this valuable resource.

Share
Download
background image

Cause

Corrective Action

The loaded paper is too small.

 (See "Removing the Roll from the Printer.")

➔

P.378

 (See "Removing the Roll Holder from Rolls.")

➔

P.381

2.

Replace the roll with a roll 10 inches wide or larger.

 (See "Attaching the Roll Holder to Rolls.")

➔

P.370

 (See "Loading Rolls in the Printer.")

➔

P.373

The printer will resume printing.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

"

Remove paper and check pap. size

"

Cause

Corrective Action

A sheet has come out of the printer during printing.

1.

Press the Release Lever back and remove the paper.

2.

Reload the sheet, aligning it with the guide on the right.

3.

Pull the Release Lever forward.

4.

If "

Not finished printing. Finish printing remaining jobs?

" is shown on the

Display Screen, press the 

OK

 button.

Printing will resume, starting from the page on which the error occurred.

 (See "Loading Sheets in the Printer.")

➔

P.392

PaprWidth Mismatch

PaprWidth Mismatch

Cause

Corrective Action

When 

Detect Mismatch

 in the Control Panel menu is

set to 

Pause

, the width of the loaded roll does not

match the width specified in 

Fit Roll Paper Width

 in

the printer driver.

Press 

▲

 or 

▼

 to select 

Print

, and then press the 

OK

 button to resume print-

ing.
However, note that this error may cause paper jams and affect the printing
quality.

Press 

▲

 or 

▼

 to select 

Stop Printing

, and then press the 

OK

 button.

Follow these steps to replace the roll to match the width specified in the printer
driver.

1.

Press 

▲

 or 

▼

 to select 

Change Paper

, and then press the 

OK

 button.

 (See "Removing the Roll from the Printer.")

➔

P.378

 (See "Removing the Roll Holder from Rolls.")

➔

P.381

2.

Replace with paper of the width configured in the printer driver.

 (See "Attaching the Roll Holder to Rolls.")

➔

P.370

 (See "Loading Rolls in the Printer.")

➔

P.373

The printer now starts printing the print job.

Make sure the roll width selected in the dialog box displayed when you select

Fit Roll Paper Width

 in the printer driver matches the width of the roll loaded

in the printer, and then try printing again.

Paper size not detected.

Paper size not detected.

Cause

Corrective Action

Paper has been loaded
askew, or warped paper
has been loaded.

Follow these steps to reload the roll.

1.

Press the 

OK

 button and reload the paper.

 (See "Loading Rolls in the Printer.")

➔

P.373

2.

Pull the Release Lever forward.

PaprWidth Mismatch

                                                                                                                                                                                                 

iPF780

                                                                                                                                                                                                                             

User's Guide

 

 

Error Message

Messages regarding paper

 

610

Summary of Contents for image Prograf iPF780 Series









































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for image Prograf iPF780 Series

SignWarehouse.com Enduracut User Manual preview
Enduracut
Brand: SignWarehouse.com Pages: 24
Roland LEC-300A User Manual preview
LEC-300A
Brand: Roland Pages: 180
Canon imagePROGRAF TM-200 Online Manual preview
imagePROGRAF TM-200
Brand: Canon Pages: 930

Brands by name

Popular brands

Load more brands