Canon im2020, Setup Instructions

Page: 107 / 143

Printer Controller ( ZC3500080 )/Printer Controller ( ZC3500130 /PS) Installation Guide
4513-7744-02
1. Contents of Kit
NOTE
Give the Printer Controller Quick Guide and Printer Driver CD-ROM to the customer.
2. Installation
• Before performing any operations, check that the amount of available memory is
100%.
• If the amount of available memory is not 100%, explain this to the customer, and then
either print out or delete any data in the memory.
• After checking that the amount of available memory is 100%, turn off the copier.
Unplug the power cord.
• The illustrations used in this manual may show a unit that differs from your machine,
depending on the model.
(1) Removing the outer covers and plates
No. Item Note
1 Printer Circuit Board (32 MB) ZC3500080 only
2 Printer Circuit Board (128 MB) ZC3500130 only
3 CompactFlash Card ZC3500130 only
4 Printer Controller Quick Guide ZC3500080 , ZC3500130
5 Printer Driver CD-ROM ZC3500080 , ZC3500130
6 Warranty Card Only U.S.A. and Canada Users
7 Installation Guide This guide
1. Remove the rear cover.
Remove the 3 screws at the back of the
copier, and then remove the rear cover.
(By slightly opening the document cover
and pressing down on the ADF angle-
detecting lever at the top of the rear cover,
the rear cover can be more easily removed.)
C4514U001AA
2. Remove the I/F CLAN circuit board cover.
• Disconnect the 2 cable connectors.
• Remove the 2 cables from the cable
clamp.
• Remove the I/F CLAN circuit board cover.
(6 screws)
C4514U002AB
Cable connectors
Cable clamp
I/F CLAN circuit
board cover
3. Remove the bracket (connector).
Remove the bracket (connector) plate. (1
screw)
C4514U003AA