Application
This manual has been issued by Canon Inc. for qualified
person to learn technical theory, installation, maintenance,
and repair of products. This manual covers all localities
where the products are sold. For this reason, there may be
information in this manual that does not apply to your
locality.
Corrections
This manual could include technical inaccuracies or typo-
graphical errors due to improvements or changes in the
products. When changes occur in applicable products or in
the content of this manual, Canon will release technical
information as the need arises. In the event of major
changes in the contents of this manual over a long or short
period. Canon will issue a new editions of this manual.
The following paragraph does not apply to any countries
where such provisions are inconsistent with local low.
Trademarks
The product names and company names described in this
manual are the registered trademarks of the individual com-
panies.
Copyright
This manual is copyrighted with all rights reserved. Under
the copyright laws, this manual may not be copied, repro-
duced or translated into another language, in whole or in
part, without the written consent of Canon Inc.
Copyright © 2002 by Canon Inc.
CANON INC.
i Printer Technical Support Dept.11,21
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi,
Kanagawa 213-8512, Japan
DTP System
This manual was produced on an Apple® Power Macintosh®
G3 personal computer and Canon LBP-2030PS laser beam
printer, final pages were printed on Valityper® 4300J.
Parts layout pictures were taken using Canon Digital Camera
EOS D30, and edited with Adobe® Photoshop® 5.0.
KEY No. and Logotypes were created using MACROME-
DIA® FreeHand® 8J.
Documents and page layouts were created using
QuarkXpress® 3.3J.
Parts lists were created using Helix Tecnologies® Herix
Xpress® and converted to EPS files.
