8
8
8-6
8-6
Service Mode > COPIER > FUNCTION > MISC-R
Service Mode > COPIER > FUNCTION > MISC-R
■
CCD
COPIER > ADJUST > CCD
Sub item
Description
ADF
model
Other
FBTAR-R
Shading target value for RED in copyboard reading
Setting range: 128 ~ 384
[Value after RAM clear: 290]
Yes
Yes
FBTAR-G
Shading target value for GREEN in copyboard reading
Setting range: 128 ~ 384
[Value after RAM clear: 284]
Yes
Yes
FBTAR-B
Shading target value for BLUE in copyboard reading
Setting range: 128 ~ 384
[Value after RAM clear: 278]
Yes
Yes
FBTAR-BW Shading target value in copyboard black and white reading
Setting range: 128 ~ 384
[Value after RAM clear: 301]
Yes
Yes
DFTAR-R
Shading target value for RED in DF reading
Setting range: 128 ~ 384
[Value after RAM clear: 334]
Yes
No
DFTAR-G
Shading target value for GREEN in DF reading
Setting range: 128 ~ 384
[Value after RAM clear: 323]
Yes
No
DFTAR-B
Shading target value for BLUE in DF reading
Setting range: 128 ~ 384
[Value after RAM clear: 318]
Yes
No
DFTAR-BW Shading target value in black and white reading
Setting range: 128 ~ 384
[Value after RAM clear: 341]
Yes
No
■
TOUCHCHK
COPIER > ADJUST > CCD
Sub item
Description
Common to all
models
CCD
To adjust the coordinate on the Touch Panel.
Yes
T-8-8
T-8-9
FUNCTION
■
CLEAR
COPIER > FUNCTION > CLEAR
Sub
item
Item
Description
FAX
model
Other
TEL-USER
Clear the user data and the registered address data.
SSSW is not cleared.
When this service mode is executed, a message
"REBOOTING..." is displayed on the Control Panel, and the
host machine is automatically restarted.
Yes
Yes
SRVC-DAT
SERVICE DATA is cleared.
User data is not cleared.
Yes
Yes
HIST
ACT-HIST Communication log is cleared.
Yes
No
ACC-HIST Each print log is cleared.
Yes
Yes
JAM-HIST JAM log is cleared.
Yes
Yes
ERR-HIST Error(E code) log is cleared.
Yes
Yes
PWD-CLEAR
Password of the system administrator is cleared.
Yes
Yes
ALL
The following data are cleared.
• USER DATA
• SERVICE DATA
• JOB ID
• Each log
• CLEAR DATE
USER DATA/ SERVICE DATA are reset to the default
location value.
Appropriate values for LOCAL / SIZE-LC needs to be preset
before executing of CLEAR -> ALL When this service mode
is executed without setting the appropriate values for LOCAL
/ SIZE-LC, factory default settings are continued to use.
When this service mode is executed, a message
"REBOOTING..." is displayed on the Control Panel, and the
host machine is automatically restarted.
Yes
Yes
■
MISC-R
COPIER > FUNCTION > MISC-R
Sub item
Description
Common to all
models
SCANLAMP
Execution of lighting function for Scanning Lamp.
(CIS LED R -> G -> B -> W -> OFF)
Yes
T-8-10
T-8-11
