Macintosh
Place a stack of blank paper in the
paper rest.
Before using the printer, align the print
head to ensure the best quality printing.
Start the alignment procedure.
Macintosh:
a.
From the
File
menu in a software
application, click
Page Setup
.
b.
Click the
Utilities
button.
c.
Click the down-arrow to select
Test Print
.
d.
Click the
Print Head Alignment
icon.
e.
Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.
Click
OK
(Windows) or
Close
then
OK
(Macintosh) when finished.
Windows:
a.
For Windows XP select
Start
,
Settings
, then
Control Panel
, then
click on
Printers and Other Hardware
,
then
Printers and Faxes
.
b.
Right-click the
Canon
i
320
icon,
then click
Printing Preferences
.
c.
Click the
Maintenance
tab, then
click the
Print Head Alignment
icon.
d.
When asked to start print head
alignment, click
OK
.
e.
Wait about 60 seconds for the
calibration sheet to print. Follow
the on-screen instructions to
complete print head alignment.
QA7-2171-V01/082002A
©2002 Canon U.S.A. Inc.
Canon is a registered trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND
From the Application folder, double-click
on the software to be installed. Follow the
on-screen instructions.
When the “Installation was successful”
screen displays,
Restart
your computer.
TURN THE PRINTER ON
.
Select the
Apple
menu, then
Chooser
.
Click on the
i
320
printer
icon.
Close the Chooser.
NOTE:
Register your product at
www.registercanon.com
to ensure product
support.
To ensure highest quality output, continue
with
Step 7 Align the Print Head
.
Open the printer driver folder on the
CD-ROM, then double-click the
Installer
icon.
Read the License Agreement, click
Accept
to continue.
Click
Install
. The printer driver will load
automatically.
NOTE:
Screen shots may differ depending on
the operating system used.
Turn the computer on
and
LEAVE THE
PRINTER OFF
.
Then insert the “
i
320
Setup
Software & User’s Guide” CD-ROM.
IMPORTANT
: Drivers included with
this printer support Mac 8.6-9.x. For
Mac OS X driver and instructions, go
to
www.canontechsupport.com
.
If the message “No other applications can
be running...” displays, click
Continue
.
When the “Installation was successful”
screen displays, click
Restart
.
When the driver installation is complete,
click
Finish.
Register your product to ensure
product support. Follow the on-screen
instructions.
When the software menu appears, click
Install
.
When the software installation is complete,
click
OK
, then
Exit
.
To ensure highest quality output, continue
with
Step 7 Align the Print Head
.
Turn the computer on
and
LEAVE THE
PRINTER OFF
.
Close all software applications, then insert
the “
i
320
Setup Software & User’s Guide”
CD-ROM. The setup program should run
automatically.
NOTE:
For Windows
®
XP or Windows 2000,
log on to Windows as an Administrator before
continuing.
IMPORTANT
: If you see the Found
New Hardware Wizard, click
Cancel
.
When the main menu appears, click
Install
.
Read the License Agreement, then click
Yes
to continue.
NOTE:
If the CD-ROM does not run automatically,
double-click
My computer
, then double-click the
CD-ROM icon.
When the Printer Port window appears,
TURN THE PRINTER ON
. The software will
begin identifying the printer port being
used.
IMPORTANT
: If your computer can
not detect a printer port, refer to the
Troubleshooting chapt
er in the
i
320
Quick Start Guide
for instructions.
1
8
2
3
4
9
10
5
6
7
5
6
1
2
3
4
7
9
10
11
12
8
1
2
3
Windows
6
Install the Printer Driver (Windows
®
)
6
Install the Printer Driver (Macintosh
®
)
7
Align the Print Head