Canon GX6040 Online Manual Download Page 271 | Manualshive

Page: 271 / 403

background image

Positioning Originals (Scanning from Computer)

This section describes how to load originals on the platen or ADF (Auto Document Feeder) for scanning. If
items are not placed correctly they may not be scanned correctly.

Important

• Be sure to observe the following when loading the original on the platen. Failure to observe the

following may cause the scanner to malfunction or the platen glass to break.

Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the

original.

• Close the document cover when scanning.
• Do not touch the operation panel buttons or LCD (Liquid Crystal Display) when opening/closing the

document cover. May result in unintended operation.

• When using a personal scanner in the upright position, the item type may not be detected automatically.

In that case, specify the item type in IJ Scan Utility and scan.

Placing Items (Platen)
Placing Documents (ADF (Auto Document Feeder))
Placing Items (When Using Stand)

Placing Items (Platen)

Place items as described below to scan by detecting the item type and size automatically.

Important

• Depending on your model, the function to scan by automatically detecting the item type and size

does not appear.

• When scanning by specifying the paper size, align an upper corner of the item with the corner at the

arrow (alignment mark) of the platen.

• Photos that have been cut to irregular shapes and items smaller than 1.2 inches (3 cm) square

cannot be cropped accurately when scanning.

• Reflective disc labels may not be scanned as expected.
• If scanned by detecting the item type and size automatically, the response may differ. In that case,

adjust the cropping frame (selection box) manually.

Photos, Postcards, Business Cards, and BD/DVD/CD

Magazines, Newspapers, and Documents

Single item:

Place the item face-down on the platen, with 0.4 inch (1 cm)
or more space between the edges (diagonally striped area)

Place the item face-down on the platen and align an
upper corner of the item with the corner at the arrow
(alignment mark) of the platen. Portions placed on
the diagonally striped area cannot be scanned.

271

«
...
269
270
271
272
273
...
»

Summary of Contents for GX6040




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for GX6040

Brand: EasyThreed Pages: 15

Brand: VASTEX Pages: 2

Brand: Creality Pages: 24

Brand: Olivetti Pages: 246

Brand: OKIDATA Pages: 44

Color Jetprinter 810 Series

Brand: Lexmark Pages: 2

Brand: Xerox Pages: 78

Brand: Oki Pages: 64

Brand: Wasp Pages: 73

DLQ-3000 Minerva+

Brand: Epson Pages: 189

Brand: Epson Pages: 223

Brand: Epson Pages: 228

DFX-8500 - Impact Printer

Brand: Epson Pages: 245

Brand: Epson Pages: 262

Disc producer PP-100N Security

Brand: Epson Pages: 153

Brand: Epson Pages: 346

Brand: Epson Pages: 292

Brand: Epson Pages: 170

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands