manualshive.com logo in svg

Canon GX6000 Series, Online Manual, Page: 98 / 403

Share
Download
Canon GX6000 Series Online Manual Download Page 98

Maintenance Procedure

If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned
printed ruled lines), perform the maintenance procedure below.

Important

• Do not rinse or wipe the print head. This can cause trouble with the print head.

Note

• Check if ink remains in the ink tanks.

Checking Ink Level

• For Windows, increasing the print quality in the printer driver settings may improve the print result.

Changing the Print Quality and Correcting Image Data

When the Print Results Are Blurred or Uneven:

Step1

 Print the nozzle check pattern.

From the printer

Printing the Nozzle Check Pattern

From the computer

• For Windows:

Printing a Nozzle Check Pattern

• For macOS:

Printing a Nozzle Check Pattern

Step2

 

Examine the nozzle check pattern

.

If there are missing lines or horizontal streaks in the pattern:

Step3

 Clean the print head.

From the printer

Cleaning the Print Head

From the computer

• For Windows:

Cleaning the Print Heads

• For macOS:

Cleaning the Print Heads

After cleaning the print head, print and examine the nozzle check pattern:   

Step1

98

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments