manualshive.com logo in svg

Canon GX6000 Series, Online Manual, Page: 300 / 403

Share
Download
Canon GX6000 Series Online Manual Download Page 300

Printer Cannot Be Used After Replacing Wireless Router or
Changed Router Settings

When you replace a wireless router, redo the network setup for the printer according to the replaced one.

Click here and perform setup.

Note

• IJ Network Device Setup Utility allows you to diagnose and repair the network status.

Select the link below to download IJ Network Device Setup Utility and install it.

Checking Printer Connection Status Using IJ Network Device Setup Utility

See below for starting up IJ Network Device Setup Utility.

For Windows:

Starting Up IJ Network Device Setup Utility

For macOS:

Starting Up IJ Network Device Setup Utility

If this does not solve the problem, see below.

Cannot Communicate with Printer After Enabling MAC/IP Address Filtering or Encryption Key on

Wireless Router

With Encryption On, Cannot Communicate with Printer After Changing Encryption Type at Wireless

Router

Cannot Communicate with Printer After Enabling MAC/IP Address

Filtering or Encryption Key on Wireless Router

Check1

 Check wireless router setting.

To check the wireless router setting, see the instruction manual provided with the wireless router or contact its
manufacturer. Make sure the computer and the wireless router can communicate with each other under this
setting.

Check2

 If filtering MAC addresses or IP addresses at wireless router, check that MAC

addresses or IP addresses for computer, network device, and printer are registered.

300

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments