Canon GX5070 Online Manual Download Page 271

Page: 271 / 325

USB Connection Problems

If the printer connected to the computer via USB is not recognized, check the following items.

USB Connection Not Recognized

The following problems may occur even though the USB connection is recognized.

• Printing (scanning) is slow.
• Hi-Speed USB connection does not work.
• A message such as "

This device can perform faster

" appears. (Windows)

If the above is the case, check the following.

USB Connection Does Not Work Properly

Note

• If your system environment does not support Hi-Speed USB, the printer operates at the slower speed

of Full-Speed or Low-Speed. In this case, the printer works properly but printing (scanning) speed may
slow down due to the communication speed.

USB Connection Not Recognized

Check1

Check that printer is turned on.

Check2

Unplug the USB cable from the printer and the computer, and then connect it

again.

As the illustration below, the USB port is at the back of the printer.

Important

• Check the orientation of the "Type-B" connector and connect to the printer. For details, refer to the

instruction manual supplied with the USB cable.

Check3

Check that

Enable bidirectional support

is selected in

Ports

sheet of

Printer properties

dialog box. (Windows)

271

Summary of Contents for GX5070






































































































































































































































































































































Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands

Canon GX5070, Online Manual

Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands